Home  |  About us  |  Products  |  News  |  Equipments  |  Service  |  Feedback  |  Contact us  |  Chinese
    Drying Equipments
    Pulverizing Equipments
    Mixing Equipments
    Granulating Equipments
    Pharmacy Equipments
    Other Equipments
Name:Changzhou FengQi Drying
Equipment Co., LTD.
Tel:0086-519-88901368
Address:Jiaoxi Town
Mobile:013906116162
Fax:0086-519-88901360
E-mail:fqdry@cnfqdry.com
Contact:Mr.Gu
Location > Home > Products > Mixing Equipments > DSH Series Double-screw Conical Mixer
Products
DSH Series Double-screw Conical Mixer
DSH Series Double-screw Conical Mixer
The central screw and the outer ribbon are connected to the ……
Live Messenger   Skype Me   QQ Me
  
Details

Descriptions
    The central screw and the outer ribbon are connected to the cycloidal needle wheel reducer, and rotate at an identical revolution. In operation, the central. In operation, the central screw lifts the material from bottom to top. mean while, the ribbon with a higher linear velocity sprials to lift  the material from bottom to top along the cone wall. The two kinds of motions make the material  be thrown into the space tangentially. and the material effects strong convection shearing and  diffusion, thus a quick mixing effect is achieved. ( the screw can also be made to a reverse one).

 
Technical parameters:

Model

Total oluvme(L)

Load fcatro

Equipped opwer(kw)

operating conditions

Overall dimension(mm)

Weight
(kg)

DSH-0.3

0.3

≤0.6

2.2

常温常压粉尘密封

1929φ920

320

DSH-0.5

0.5

≤0.6

4

常温常压粉尘密封

2322φ1124

410

DSH-1.0

1.0

≤0.6

7.5

常温常压粉尘密封

2869φ1480

900

DSH-1.5

1.5

≤0.6

11

常温常压粉尘密封

3140φ1633

1200

DSH-2.0

2.0

≤0.6

11

常温常压粉尘密封

3489φ1900

1300

V mixer series of products for efficient asymmetric V-mixer, it applies to chemical, food, medicine, feed, ceramics, powder metallurgy and other industries or granule-like material mixed. V mixer reasonable structure, simple operation closed, easy access to materials, (manual or vacuum feeding) tube made ​​of stainless steel for easy cleaning, is one of the enterprise infrastructure. V mixer unique structure, mixing, high efficiency, no accumulation of material. The whole structure is simple, easy to operate. The outer surface and material contact parts are high quality stainless steel, beautiful appearance, maintenance, easy to clean.
Mixing equipment is often called the agitator (or stirred tank), when the mixing device, when used as a reactor, also known as the stirred tank reactor, sometimes referred to as the reactor. Kettle body structure type is usually vertical cylindrical, its height to diameter ratio of the operation is mainly based on liquid containers and the loading height to diameter ratio coefficient size. The container loading liquid height to diameter ratio and nature of the materials as container, mixing characteristics and blender layers vary, generally take 1 to 1.3, maximum up to 6. Kettle at the end of the shape of flat, oval bottom, cone bottom, etc. and sometimes also with a square kettle. Meanwhile, according to the process of heat transfer requirements, kettle jacket can be added in vitro, and through the steam, cooling water and other heat-carrying medium; when insufficient heat transfer area, but also within the body set up in the reactor coil and so on.
Drying machine is electric power, diesel power, wind, combustible force of heated air used to generate power, transported to through around, and then to the appropriate temperature dehumidification process. 1, dry strength, due to highly dispersed material in the air, particles of all effective surface area of ​​active dry. 2, 3 drying time is short, simple structure, air dryer, small footprint, easy construction and maintenance. 4, large capacity, high thermal efficiency. When combined with water, non-drying, the thermal efficiency of up to 60%. 5, the dryer to achieve a "zero thrust", greatly reducing the gear wheel wear, cylinder smooth and reliable operation; 6, drying machine, "self-aligning roller-type device", the roller and roll forever ring with linear contact, thus greatly reducing wear and power loss;
Ribbon blender blades to screw strip, the number of snails with two to three, to be installed in the center of the screw mixer, screw-type mixer with a spiral with a pitch diameter of the decision. Ribbon blender is usually operated in the laminar flow state for the high viscosity of the liquid and plastic fluid to be mixed.
Home | About us | Products | News | Equipments | Service | Contact us | Privacy Statement | XML
Copyright Changzhou FengQi Drying Equipment Co.,Ltd. Professional supply V mixer,Mixing equipment,Drying machine,Ribbon blender
Address:Jiaoxi Town, Wujin District, ChangZhou City , Jiangsu Province, China. E-Mail:fqdry@cnfqdry.com Tel:0086-519-88901368  Fax:0086-519-88901360