Home  |  About us  |  Products  |  News  |  Equipments  |  Service  |  Feedback  |  Contact us  |  Chinese
    Drying Equipments
    Pulverizing Equipments
    Mixing Equipments
    Granulating Equipments
    Pharmacy Equipments
    Other Equipments
Name:Changzhou FengQi Drying
Equipment Co., LTD.
Address:Jiaoxi Town
Location > Home > Products > Drying Equipments > HZG Series Revolving Cylinder Drier
HZG Series Revolving Cylinder Drier
HZG Series Revolving Cylinder Drier
Mostly the machine is used in per burning of rigid magnet oxygen ´´
Live Messenger   Skype Me   QQ Me
HZG Series Revolving Cylinder Drier
    Mostly the machine is used in per burning of rigid magnet oxygen Pulverized fodder; it is also suitable for the cement, metallurgy and Chemical industry. It is made up of main kiln body and supporting Drive set cooling pipe and supporting drive set, fuel system, electricity Control secondary air set, exhaust dust set and warm-up kiln body etc. The machine has function like: give an alarm for over temperature, give an alarm for over loading, auto control for working temperature, oxygen atmosphere is adjustable in the kiln etc.

    When the damp raw material is fed from one terminal, it is turned over through blades that are distributed inside the cylinder and will be distributed uniformly in the drier and contact fully with the countercurrent hot air. In this way, the process of heat conduction is increased. During the period of dry, under the effect of incine blades and hot air stream, raw material can be moved to the star section of drier and discharged from disharged form discharging valve.

¢ It is suitable for drying the following raw materials. They are granules with heavy specific gravity in chenmical industry, mine industry, metallurgy industry such as ore, slag, coal, metallic powder, phosphorus  fertilizer, ammonia sulfate.
¢ Moreover for raw materials that are granules with special requirements, such as HP vesicant, less, light calcium carbonate, active white earth, magnetic powderm, graphite, lag of medicine
¢ Raw materials that need low temperature and in batch continuously.

¢ High in the etent of mechanization and strong in production capacity.
¢ The  resistance for fluid passing through the cylinder is small. The consumption of power and energy is low.
¢ It has strong adaptability to the properties of raw material. The operation is stable. The cost of operation is cheap.
¢ The uniformity of dried substance is good.

Form Direct heating down-stream Direct heating reverse-flow Compound heating
Kinds of raw material Ore HP Vesicant Ore residue of blast furnace Ammonium sulphate Phosphorus fertilizer coal
Amount to be treated kg/h 1000 466 15000 20000 12000 5000
Primary moisture % 30 13 6 1.5 5 6.5
Final moisture % 15 0.3 1 0.1 0.1 0.1
Average diameter mm 6.5 0.05 4.7 0.5-0.7 0.5 5
Specific gravity of raw material kg/m2 770 800 1890 1100 1500 750
Amount of hot air m3/kg 39000 5400 10750 9800 6500 16000
Temperature of air at inlet in ≧ 600 165 500 180 650 570
Temperature of product at outlet≧   42 100 70 80 75
Heating way Gas Steam,electric heating Heavy oil Coal fuel hot air furnace Heavy oil Heavy oil
Loading coefficient   6.3 7 7.5 7.8 18
Revolution rpm 4 4 3.5 3 4 2
Gradient m/m 0.04 0.005 0.03 0.05 0.05 0.043
Quantity of stirring-up rake 12 24 12 22 Outer of inner cylinder 8
,Inner of outer cylinder 16
Outer of inner cylinder 6
,Inner of outer cylinder 12
Diameter of dryer m 2.0 1.5 2 2.3 Outer of inner cylinder 2,
Inner of outer cylinder 0.84
Outer of inner cylinder 2.4,
Inner of outer cylinder 0.95
Length of dryer m 20 12 17 15 10 16
Driving power kw 22 7.5 15 11 11 15
V mixer series of products for efficient asymmetric V-mixer, it applies to chemical, food, medicine, feed, ceramics, powder metallurgy and other industries or granule-like material mixed. V mixer reasonable structure, simple operation closed, easy access to materials, (manual or vacuum feeding) tube made ​​of stainless steel for easy cleaning, is one of the enterprise infrastructure. V mixer unique structure, mixing, high efficiency, no accumulation of material. The whole structure is simple, easy to operate. The outer surface and material contact parts are high quality stainless steel, beautiful appearance, maintenance, easy to clean.
Mixing equipment is often called the agitator (or stirred tank), when the mixing device, when used as a reactor, also known as the stirred tank reactor, sometimes referred to as the reactor. Kettle body structure type is usually vertical cylindrical, its height to diameter ratio of the operation is mainly based on liquid containers and the loading height to diameter ratio coefficient size. The container loading liquid height to diameter ratio and nature of the materials as container, mixing characteristics and blender layers vary, generally take 1 to 1.3, maximum up to 6. Kettle at the end of the shape of flat, oval bottom, cone bottom, etc. and sometimes also with a square kettle. Meanwhile, according to the process of heat transfer requirements, kettle jacket can be added in vitro, and through the steam, cooling water and other heat-carrying medium; when insufficient heat transfer area, but also within the body set up in the reactor coil and so on.
Drying machine is electric power, diesel power, wind, combustible force of heated air used to generate power, transported to through around, and then to the appropriate temperature dehumidification process. 1, dry strength, due to highly dispersed material in the air, particles of all effective surface area of ​​active dry. 2, 3 drying time is short, simple structure, air dryer, small footprint, easy construction and maintenance. 4, large capacity, high thermal efficiency. When combined with water, non-drying, the thermal efficiency of up to 60%. 5, the dryer to achieve a "zero thrust", greatly reducing the gear wheel wear, cylinder smooth and reliable operation; 6, drying machine, "self-aligning roller-type device", the roller and roll forever ring with linear contact, thus greatly reducing wear and power loss;
Ribbon blender blades to screw strip, the number of snails with two to three, to be installed in the center of the screw mixer, screw-type mixer with a spiral with a pitch diameter of the decision. Ribbon blender is usually operated in the laminar flow state for the high viscosity of the liquid and plastic fluid to be mixed.
Home | About us | Products | News | Equipments | Service | Contact us | Privacy Statement | XML
Copyright Changzhou FengQi Drying Equipment Co.,Ltd. Professional supply V mixer,Mixing equipment,Drying machine,Ribbon blender
AddressJiaoxi Town, Wujin District, ChangZhou City , Jiangsu Province, China. E-Mailfqdry@cnfqdry.com Tel0086-519-88901368  Fax0086-519-88901360